Home
DIY
Print|Email|Text Size: ||
Make a Crate Cover
Sometimes, a pup just needs a little privacy or protection from the sun.
Crate Cover

Materials
•Heavyweight fabric (such as upholstery fabric or a quilted material), bias tape and thread
•Velcro® or ribbon for air vents and attachments (optional)

Directions
Measure the crate. Allow extra for shrinkage and seam allowances, plus some for roominess. If the crate is relatively small, you can cut out the cover in one piece (see drawing). If you want air vents, cut them out.You can also cut the front and top with a “front blind” as one piece, and the sides and back separately.

To keep the cover from being too warm for summer use, make a wide opening at the top, centered on the back, so air can circulate.

Fold under a hem of 3⁄4 in. + 3⁄4 in. around the edge and sew it down, or finish edge with bias tape.

If you didn’t cut out the front blind in the same piece as the top, cut it out separately. The blind should be a little bigger than an air vent; don’t forget the seam allowances. Hem around both short sides and one long side. Sew the other long side securely to the top if it wasn’t previously cut as one piece. Attach Velcro® so that the blind can be held down when it’s cold. Also attach Velcro® on the top so the blind can be held open (see photo). In order to adjust the air vents, use lengths of Velcro® on the top.Use Velcro® or ribbon on the long sides of the air vents to attach the back to the crate.

Sew the sides and back securely to the top (with front and blind) if they were not cut out as a single piece. Sew the back to the sides, with side A at side B.

If you are sewing the sides to the front, match side C to side D. Fold and sew a hem around entire lower edge.

You may also want to sew a Velcro® or ribbon closure on the lower edge at C, if needed.

If there is a carrying handle on the cage, cut out an opening for it in the cover. Overcast the raw edges, then hem or edge with bias tape.

Print|Email
This article first appeared in The Bark,
Issue 56: Sept/Oct 2009

More From The Bark

By
Michael Spears
By
Esther K. Smith
By
The Bark
More in DIY:
Crocheted Dog Bed
Felt Dogs
Knit Your Own Zoo
DIY: Personalized Fabrics
Cool Collarettes
Wrap It Up
DIY Project Handy Tugger Toy
The Bark’s DIY First Place Winner—Advanced Level
Papier-Mâché Dogs
Folding Feeding Stand